4pcs 20mm Hubcentric 5x4.5/5x114.3 Wheel Spacers Adapter 66.1CB 12x1.25 Studs BK

Description

4pcs 20mm (0.8") Hubcentric 5x4.5/5x114.3 Wheel Spacers Black (66.1 bore, 12x1.25 Studs) for Nissan Infiniti G35 G37 FX35 FX50 350z 370z Altima Maxima 300zx 240sx Rogue Murano Sentra
5x4.5/5x114.3  Vehicle Bolt Pattern
5x4.5/5x114.3  Wheel Bolt Pattern
0.8"(20mm) Thick
66.1mm Center Hub Bore
6061 T6 Billet FORGED Aluminum
CNC Machined
M12X1.25 Wheel studs
Package included: 4 sets as picture show
Why Use Wheel Spacers?
4pcs 20mm Hubcentric 5x4.5/5x114.3 Wheel Spacer Adapter 66.1CB 12x1.25 Studs BK
4pcs 20mm (0.8") Hubcentric 5x4.5/5x114.3 Wheel Spacers Black (66.1 bore, 12x1.25 Studs) for Nissan Infiniti G35 G37 FX35 FX50 350z 370z Altima Maxima 300zx 240sx Rogue Murano Sentra
5x4.5/5x114.3
Vehicle Bolt Pattern
5x4.5/5x114.3
Wheel Bolt Pattern
0.8"(20mm) Thick
66.1mm Center Hub Bore
6061 T6 Billet FORGED Aluminum
CNC Machined
M12X1.25 Wheel studs
Package included: 4 sets as picture show
Why Use Wheel Spacers?
Appearance.
You want to push the wheels out for a better stance and more aggressive look. This is totally subjective to your personal tastes. And we can't tell you what to like...
Clearance.
Many wheels are not compatible with big brake kits. The spoke of the wheel will scrape the new brake caliper and you need a wheel spacer to push the wheel spoke away from the caliper.
Correction.
You may have bought a set of wheels that don't have the correct offset for your car. The offset may be too high, resulting in the wheels sitting too far inward. This is both ugly and incorrect as the tire can now rub on the inside wheel well, or on suspension components, etc. A wheel spacer will push the wheel out and 'correct' the offset.
Handling.
By spacing the wheels further apart, you can make the car more stable and corner better. You can gain a similar effect as adding a wider wheel without the added weight and expense.
What Size Should I Use?(How thick spacers should I choose?)
This is one of our most commonly asked questions.
Unfortunately, it has no easy answer.
Picking a spacer that meets your needs is not as easy as it sounds.There are a few different reasons why people need spacers so every situation ends up being different. But
every situation can be resolved by finding out how much available space you have
to work with. That means measuring the tire-fender clearance. This empty space will likely be your spacer size. You don't want to exceed the empty space because that will lead to the tire rubbing on the fender. And you don't want to get too thin of a spacer because that may not meet your needs.
Every situation is different and the best advice we can give is to
measure your car
. It's tempting to listen to what everyone else is running but unless they have your exact wheel, exact tire, exact brake rotor, exact suspension, and exact suspension settings, no one can tell you what spacer size to use. They can only guess... Please keep in mind that spacers that have been installed and tested cannot be returned. Which is all the more reason to be precise about what size you can install.
Here is the easy way to measure your wheel gap:
The outside of the tire sidewall is usually the widest point of your wheel and tire (unless the tires are 'stretched' across the rim. With the tire/wheel on the car and the car on the ground at its desired ride height, place a straight edge or ruler between the outermost tire spot and the inside of the fender lip. The distance is your wheel gap and your spacer size. This is the max spacer size so it would be a good idea to choose a spacer one size lower to account for suspension travel.
Item Specifics
Brand :
ZY WHEEL
Manufacturer Part Number :
ZY-002BK
Warranty :
90 Day
Placement on Vehicle :
Left
Material :
T6 6061 Billet Aluminum
Thread Pinch :
M12x1.25
Center Bore :
66.1mm
Vehicle Bolt Pattern :
5x4.5 or 5x114.3
Wheel Bolt Pattern :
5x4.5 or 5x114.3
Thickness :
0.8''(20mm)
UPC :
602430040702
Payment
Business Policy:
Shipping
Shipping:
We will shipping all the orders within 2days, they are shipping from US, it may takes 5-10days get to your home.
Returns
Return:
If the items has any problems, you can return them back. If you don't like the item you received, you can return it back, but you should pay the return shipping fee and 20% restocking fee. If the items have been used, they can't be return. All the items return should be with the orignal package.
Contact Us
Contact us:
If you have any questions, please free send email to us by eBay. We will reply to you as soon as we get your email. Our office is in China, so we may can't reply to you as soon as you want. Please don't left negative feedback to us before you contact to us. Thanks.
Your best online business partner
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Wheel Spacers
Hot Item
4pcs Wheel Spacers Adapter 2" 5x5.5 to 5x5.5 Bolt Pattern 1/2" Studs 108mm CB BK
USD 115.99
4pcs Wheel Spacers Adapters 2" (50mm) Thickness 5x4.5/5x114.3 87.1CB 1/2" Black
USD 95.99
4pcs Wheel Spacers Adapters Blue 2" (50mm) Thickness 5x4.5/5x114.3 87.1CB 1/2"
USD 95.99
4pcs 20mm Hubcentric 5x4.5/5x114.3 Wheel Spacer Adapter 66.1CB 12x1.25 Studs BK
USD 75.99
Picture
New List Item
4pcs Wheel Spacers Adapters Blue 2" (50mm) Thickness 5x4.5/5x114.3 87.1CB 1/2"
USD 95.99
4pcs 20mm Hubcentric 5x4.5/5x114.3 Wheel Spacer Adapter 66.1CB 12x1.25 Studs BK
USD 75.99
4pcs Wheel Spacers Adapter 2" 5x5.5 to 5x5.5 Bolt Pattern 1/2" Studs 108mm CB BK
USD 115.99
4pcs Wheel Spacers Adapters 2" (50mm) Thickness 5x4.5/5x114.3 87.1CB 1/2" Black
USD 95.99
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us
4pcs 20mm Hubcentric 5x4.5/5x114.3 Wheel Spacer Adapter 66.1CB 12x1.25 Studs BK
4pcs 20mm (0.8") Hubcentric 5x4.5/5x114.3 Wheel Spacers Black (66.1 bore, 12x1.25 Studs) for Nissan Infiniti G35 G37 FX35 FX50 350z 370z Altima Maxima 300zx 240sx Rogue Murano Sentra
5x4.5/5x114.3
Vehicle Bolt Pattern
5x4.5/5x114.3
Wheel Bolt Pattern
0.8"(20mm) Thick
66.1mm Center Hub Bore
6061 T6 Billet FORGED Aluminum
CNC Machined
M12X1.25 Wheel studs
Package included: 4 sets as picture show
WARNING: Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to:
1) Shorten the factory studs
2) Purchase a set of shorter studs and replace them with the factory studs.
3) The back of your wheels need to have the open slots (cavities)(at least 2" width and 1/4" deep) between mounting holes for installation of these spacers.These cavities are NEEDED so that the lug nuts and wheel studs can sit in this pocket. Verify this before purchasing.
Applications:
1995-1998 Nissan 240SX (Will NOT fit Base Models)
1987-1996 Nissan 300ZX
2003-2008 Nissan 350Z
2009-2017 Nissan 370Z
2002-2017 Nissan Altima
1995-2017 Nissan Maxima
2003-2016 Nissan Murano
2008-2016 Nissan Rogue
2000-2011 Nissan Sentra (SE-R & SE-R Spec V ONLY)
2012-2017 Nissan Sentra
2003-2012 Infiniti FX35
2003-2008 Infiniti FX45
2009-2013 Infiniti FX50
2003-2008 Infiniti G35
1996-2001 Infiniti I30
2002-2004 Infiniti I35
1993-1997 Infiniti J30
1990-1992 Infiniti M30
2003-2010 Infiniti M45
1990-2006 Infiniti Q45
Important Notes
- It's recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won't hit the fender or any other part of the vehicle.
- Buyer's need to measure the length of their vehicle's OEM/Factory wheel studs, to ensure it doesn't extend past the surface of the spacer
- Installation should only be performed by a trained professional.
- Be sure to torque the lug nuts to manufacturer specifications
- Avoid using an impact wrench; improper usage may cause damage to components
- Check and re-torque all lug nuts after 25-50 miles of driving
- Failure to follow proper procedures may cause your lug nuts to come undone while driving
- No returns or exchange once installed
Why Use Wheel Spacers?
Appearance.
You want to push the wheels out for a better stance and more aggressive look. This is totally subjective to your personal tastes. And we can't tell you what to like...
Clearance.
Many wheels are not compatible with big brake kits. The spoke of the wheel will scrape the new brake caliper and you need a wheel spacer to push the wheel spoke away from the caliper.
Correction.
You may have bought a set of wheels that don't have the correct offset for your car. The offset may be too high, resulting in the wheels sitting too far inward. This is both ugly and incorrect as the tire can now rub on the inside wheel well, or on suspension components, etc. A wheel spacer will push the wheel out and 'correct' the offset.
Handling.
By spacing the wheels further apart, you can make the car more stable and corner better. You can gain a similar effect as adding a wider wheel without the added weight and expense.
What Size Should I Use?(How thick spacers should I choose?)
This is one of our most commonly asked questions.
Unfortunately, it has no easy answer.
Picking a spacer that meets your needs is not as easy as it sounds.There are a few different reasons why people need spacers so every situation ends up being different. But
every situation can be resolved by finding out how much available space you have
to work with. That means measuring the tire-fender clearance. This empty space will likely be your spacer size. You don't want to exceed the empty space because that will lead to the tire rubbing on the fender. And you don't want to get too thin of a spacer because that may not meet your needs.
Every situation is different and the best advice we can give is to
measure your car
. It's tempting to listen to what everyone else is running but unless they have your exact wheel, exact tire, exact brake rotor, exact suspension, and exact suspension settings, no one can tell you what spacer size to use. They can only guess... Please keep in mind that spacers that have been installed and tested cannot be returned. Which is all the more reason to be precise about what size you can install.
Here is the easy way to measure your wheel gap:
The outside of the tire sidewall is usually the widest point of your wheel and tire (unless the tires are 'stretched' across the rim. With the tire/wheel on the car and the car on the ground at its desired ride height, place a straight edge or ruler between the outermost tire spot and the inside of the fender lip. The distance is your wheel gap and your spacer size. This is the max spacer size so it would be a good idea to choose a spacer one size lower to account for suspension travel.
Item Specifics
Brand :
ZY WHEEL
Manufacturer Part Number :
ZY-002BK
Warranty :
90 Day
Placement on Vehicle :
Left
Material :
T6 6061 Billet Aluminum
Thread Pinch :
M12x1.25
Center Bore :
66.1mm
Vehicle Bolt Pattern :
5x4.5 or 5x114.3
Wheel Bolt Pattern :
5x4.5 or 5x114.3
Thickness :
0.8''(20mm)
UPC :
602430040702
Business Policy:
Shipping:
We will shipping all the orders within 2days, they are shipping from US, it may takes 5-10days get to your home.
Return:
If the items has any problems, you can return them back. If you don't like the item you received, you can return it back, but you should pay the return shipping fee and 20% restocking fee. If the items have been used, they can't be return. All the items return should be with the orignal package.
Contact us:
If you have any questions, please free send email to us by eBay. We will reply to you as soon as we get your email. Our office is in China, so we may can't reply to you as soon as you want. Please don't left negative feedback to us before you contact to us. Thanks.
All right reserved.
Powered by SoldEazy