Manual ink cup pad printer + Polymer plates making package Business start kits

Description

Manual Sealed inkcup pad printing printer + plate making kits package
Manual pad printing printer package:
(One stop solution to pad printing, you only need buy the pad printing ink to start up the pad printing ! )
Including:
Manual inkcup pad printer, 1 piece
UV Exposure machine ( Plate maker ), 1 piece
Cliche Making Polymer
Plates, 2 pcs
Rubber Pads , 2 pcs
A4 size Transparent films, 5 pcs
( for injet printer or laser priter uses )
Pad printing
's biggest advantages are the ability to print on irregular surfaces, such as golf balls, lighters, pens, bottles, toys,etc, on small areas image printing. It can also print on flat surfaces.
Pad printing
is a printing process that can transfer a 2-D image onto a 3-D object. This is accomplished using an indirect offset printing process that involves an image being transferred from the printing plate (cliché) via a silicone pad onto a substrate (surface to be printed). Pad printing is used for printing on otherwise impossible products in many industries including medical, automotive, promotional, apparel, electronics, appliances, sports equipment and toys.
Advantages of
Photopolymer Plates
making:
1.
Good for the environment
, no need chemicals.
2.Make clich making process easier to operate.
3.Save money for you, no need of chemicals and no steel coating machine.
This package uses: Photopolymer Plates
The plate material is UV photosensitive and when exposed to an ultraviolet light through a high contrast negative, the U.V. cross links the polymers and hardens the image.
The unexposed portion of the negative is washed off in plain water, dried and post exposed.
the plate is ready for the press in less than thirty minutes.
1:Pad Printer (sealed ink cup), ONE Unit
TECHNICAL PARAMETER:
Max printing area 80×
80mm
Steel plate size 100×
100mm
Max workpiece length
150mm
Level stroke
100mm
Pad vertical distance
60mm
Printing speed 400pcs/hr
Out dimension 400×200×500mm
Machine net weight
27kg
Free two pads (one square and one round)
2: UV Exposure plate maker,
ONE
Unit
Main features:
User-friendly desktop design with long-term life span
Parameters.
6 UV fluorescent tubes
Exposing area:
10.23"x8.26"(260x210mm)
Voltage: 110v/220v
Light power: 48W (8W x 6 tubes)
Time Range: 0-5.5 mins
Machine size:11.82"x11.8"x29.5"(30x29x75cm)
Net weight: 12Lb(5kg)
3: Cliche making Polymer plates:
2 sheets
Size: 100mm x 100 mm
Providing a good do-it-yourself option. These are typically used in short to medium production runs.
Water washable No solvent used!!
High durability, Allows printing very fine lines and big solid lines together, by using 300 lpi screen available.
High Reproductivity
Cost Effective
4:Transparent films:
5 SHEETS
( for ink-jet printer or laser priter uses )
Any Epson/HP/Canon ink-jets printers can use it.
This Film is a specially coated,clear film that absorbs quick drying inkjet ink, and controls the shape of fine lines and half tones,can be used to make stencil in screen printng,hot stamping and pad printing.Ink-jets achieve better quality.
Print on the coated (matte) side of the film!
For the unique high-tech solution, they can not be conglutinated with each other when folded together. The image is well-resisting and suitable for storage.
Note 1: This film also can be used in your laser printer
Note 2: Your wet finger will stick to the coated side.
Note 3: Printing side is the non-smooth side
A4 8"x12" (210x297 mm)
Pad Printing Polymer Plate Making Process
1.Contact with Positive film
Remove cover film slowly and place positive film onto undeveloped plate.Keep the positive film contact with the plate tightly.
Use positive film having optical density of not less than 3.0.
2.Exposure
Put the plate covered with film on the glass of the UV exposing machine. Expose plate, through positive film, to UV light having 360 nm wave lengths for 1-2 minutes.
3.Wash-out
Remove positive film.
Wash-out exposed plate with water, at 15-25 degree for 1-2 minutes. You can use a sponge roll or very soft brush. If wash out unit is not available, you can wash it out with running tap water.
4.Drying
Dry the plate in a hot-air dryer after removing the surface water by sponge roll(or soft brush) at 50-70 degree for 5-10 minutes.
5.Post exposure
Expose the dried plate to UV light again for 15-20 minutes in order to get stability.After post-exposing, the plate will become hard enough to be suitable for printing.
General Hints:
Gloss film as well as matted film can be used.
Good contact between film and plate is essential.
Treat films carefully as any kink will be reproduced on the developed plate.
Check film and plate without any dust before exposure.
Minimize the pressure of doctor blade to enjoy longer durability of plate.
It can be used in inkwell system and closed ink cup system.
inkfrog terapeak
Listing and template services provided by inkFrog